Network Menu - HP A1353A User Manual

Click Delete Users to delete the user account. The account is removed and no longer appears on the
2.
User Accounts screen.

Network menu

Click Network in the left navigation frame to access the Network screen. This screen enables
administrators to configure network settings for the management module.
The management module MAC address is displayed on the Network screen for informational purposes.
To configure the network settings:
Select a radio button to enable or disable BOOTP. By default, BOOTP is enabled.
1.
Change the IP address of the management module.
2.
Change the network mask of the management module.
3.
Change the default gateway of the management module.
4.
Select a radio button to set the date and time manually or enable NTP.
5.
If you enabled NTP in step 5:
6.
Enter the IP address of the primary NTP server.
a.
Enter the IP address of the secondary NTP server.
b.
HP UPS Management Module web interface 59