Attached Devices Menu; Snmp Traps Tab - HP A1353A User Manual

SNMP Traps tab

This screen enables administrators to configure SNMP trap event notifications.
To configure the SNMP trap notifications:
Enable SNMP traps for up to 10 servers.
1.
Enter the IP address for up to 10 trap recipients in the IP Address field.
2.
Do one of the following:
3.
Click Save Settings to save the information.
o
Click Undo Changes to undo the changes.
o
Click Help to view online help.
o
Click Send Test Trap to send a test SNMP trap.
4.

Attached Devices menu

Click Attached Devices in the left navigation frame to display the Attached Devices screen. This screen
enables administrators to manage attached devices.
NOTE: Depending on the specific UPS model, this screen will vary.
HP UPS Management Module web interface 67