HP DMXTM 400/430 Operator's Manual page 50

6. The XW and XH positions are used to magnify widths and
heights of fonts, and to change the wide/narrow ratio of bar
codes.
7. Enter the desired XH dimension. The default value for fonts is
1. The default value for element bar codes such as UPC or code
128 is 1. For ratio-based bar codes, the default value is 1.
40
Creating Labels Using Internal Batch Software
If you wish to magnify the width of a font, valid
responses are 1 through 9 and A through O. The default
value is 1 for fonts.
If you wish to magnify the width of a bar code, valid
responses are 1 through 9 and A through K. The default
is 3 for ratio-based bar codes, 2 for fonts Q & R and 1
for all other bar code fields. If the pixel width is 1, the
result will be a 5 mil wide bar. If the pixel width is 2,
the result will be a 10 mil wide bar. Pixel sizes by label
format are specified in the print Parameters screen.
Enter the desired XW dimension and press the return
key. The cursor will move to the XH position.
If you wish to magnify the height of a font, valid
responses are 1 through 9 and A through O. The default
value is 1 for fonts.
If you wish to magnify the width of a bar code, valid
responses are 1 through 9 and A through K. The default
is 3 for ratio-based bar codes, 2 for fonts Q & R and 1
for all other bar code fields. If the pixel width is 1, the
result will be a 5 mil narrow bar. If the pixel width is 2,
the result will be a 10 mil narrow bar. Pixel sizes by
label format are specified in the Print Parameters
Screen.
Enter the desired XH dimension and press the return
key. The cursor will move to the bar height (BH)
position.
DMX 400/430 Operator's Manual