Printer Fails To Turn On - HP DMXTM 400/430 Operator's Manual

Printer fails to turn on

A fuse may be blown, call for service.
Faulty AC cord.
A bad power switch may exist on the Printer, call for
service.
A faulty AC wall outlet.
Label advances 1-2 inches before a fault indication
The ribbon is installed incorrectly. Make sure that the dull
side (side with ink) is facing the paper.
The labels are installed incorrectly.
A bad ribbon/paper is resulting in an insufficient amount of
friction between paper and ribbon. Ensure that the correct
type of ribbon is being used.
Label advances 12 inches before a fault indication
The labels are installed incorrectly.
A hardware problem may exist, call for service.
The Media Sensor may be out of adjustment.
The Media Sensor, or Media Sensor Circuitry may be
defective, call for service.
DMX 400/430 Operator's Manual
Troubleshooting
73