Printing Problems - Epson Stylus Photo 890 Basic Manual

For Windows 2000, if you see a
Digital Signature Not Found
screen, click
the installation. Otherwise your
driver installation won't be
completed.
In Windows 2000, don't select
under
Block
System> Hardware> Driver
Signing
instead.
Make sure Windows 98, Me or
2000 was preinstalled on your
system. The USB Printer Device
Driver may not install correctly if
you've upgraded your system from
an earlier version of Windows.
Make sure the Universal Serial Bus
Controller is working properly. See
your Windows online help system
for details. If it's not working,
contact your computer
manufacturer.
If you're printing over a network,
see your electronic Reference Guide
for instructions on configuring your
printer for use on a network.
88
to continue with
Yes
Control Panel>
; select or
Ignore Warn

Printing Problems

Only the Ppower light is on, but
nothing prints.
Make sure the interface cable
is connected securely and that
the cable meets the system
requirements on page 99 or
page 100.
Run a printer check as described
on page 85. If the check page
prints, make sure your printer and
application software are installed
correctly.
If you're printing on a network, you
need to set up your printer for
network printing, as described in
your electronic Reference Guide.
The printer sounds as though it is
printing, but nothing prints.
Make sure the print head nozzles
are not clogged. To clean the print
head, see page 73.
The printer won't operate properly
if it's tilted or at an angle. Place it
on a flat, stable surface that extends
beyond the printer base in all
directions.