Solving Miscellaneous Printout Problems - Epson Stylus Photo 890 Basic Manual

Roll paper doesn't feed correctly.
To load paper correctly, gently hold
the paper in place with your hand
while you press the z button.
Don't force the paper to feed into
the printer. Allow the paper to feed
automatically.
Use a triangle or other tool to
make sure the end of the roll is cut
perpendicular to the edges. If the
end is cut on a diagonal, the paper
may not feed smoothly.
If you see a paper jam error
message, press the z roll paper
button for four seconds to clear the
error.
If the b maintenance light is on,
press the b maintenance button
and wait for the light to go off.
Then press the z roll paper button
to resume printing.
Remove the paper support and
close the output tray extensions.
Always select
Roll Paper
Paper Source setting. If
(or
Feeder Auto Sheet Feeder
is selected, paper will feed
unnecessarily after each print job.
In addition, a great deal of paper
may feed unnecessarily when you
turn your computer off and then on
again.
If extra paper feeds after a print job
or after you turn on the printer,
press the z roll paper button for
Solving Miscellaneous
Printout Problems
as the
The image is inverted.
Sheet
)
Turn off
software or the mirror setting in your
application. (If you're printing on
EPSON Iron-On Cool Peel Transfer
Paper, the image should be inverted.)
three seconds to rewind the paper.
(You may need to repeat this step to
rewind the paper completely.) Then
press the b maintenance button to
turn off the b maintenance light.
Finally, reload the paper and press
the z roll paper button again to
resume printing.
Always press the z roll paper
button to feed roll paper. If you
press the b maintenance button
instead and then turn either the
printer or your computer off and
on again, paper will feed
unnecessarily and you'll see a paper
jam error message.
If paper is curled, roll the paper
inside the uncurling sheet in the
direction opposite to the paper's
curl. You don't need to uncurl the
entire roll—only about 9.3 inches.
Flip Horizontal
in the printer
93