Problems With Paper Feeding - Epson Stylus Photo 890 Basic Manual

Your printout is grainy.
Try using a higher quality paper.
Set the Quality/Speed slider to the
Quality
software; see page 10 (Windows) or
page 16 (Macintosh).
You may need to increase the image
resolution or print it in a smaller
size; see your software
documentation.
Problems with Paper
Feeding
Too many copies are printing.
Make sure that neither the Copies
setting in your printer software or
application is set for multiple copies.
Paper doesn't eject fully or is
wrinkled.
If the paper doesn't eject fully, you
may have set the wrong paper size.
Press the b maintenance button to
eject the paper, and then select the
correct paper size in your
application or printer software.
If it's wrinkled when it ejects, the
paper may be damp or too thin.
92
setting in your printer
Paper doesn't feed correctly or jams
in the printer.
If paper doesn't feed, remove it
from the sheet feeder, reload it
against the right edge, then slide the
left edge guide against the paper.
If multiple pages feed at once,
remove the stack from the sheet
feeder, fan the edges to separate the
sheets, and carefully reload it.
If paper jams, press the b
maintenance button for several
seconds to clear the jam. If that
doesn't work, turn off the printer
and gently pull the paper forward
(toward the output tray) to pull it
out. Reload the paper and press the
b maintenance button.
If you try to print while the b
maintenance light is on, your paper
won't feed properly. Press the b
maintenance button to turn off the
light before you print.
If your paper loads incorrectly or jams
frequently:
Use new, smooth, high-quality
paper, loaded printable side up.
Don't load paper above the arrow
mark on the left edge guide.
Place the paper against the right
edge and slide the left edge guide
against it, but not too tightly.