Fujitsu LIFEBOOK T580 Operating Manual page 80

Security functions
► Now press the Enter key. The SystemLock administration menu will be displayed:
Security
SmartCard SystemLock
SmartCard SystemLock
Uninstall:
BIOS Recovery:
SmartCard and Pin
SmartCard Initialization
Admin SmartCard
SuperUser SmartCard:
User SmartCard:
Service SmartCard:
SmartCard Configuration
Change PIN:
Change PUK:
Unblock SmartCard:
► For security reasons, the preset PUK should always be changed before removing
the new SmartCard. To do this, under SmartCard Configuration, select the option
Change PUK, press the Enter key and input the new PUK.
► First enter the preset PUK.
Enter the PUK:
New SmartCards have a preset PUK (see above).
You will need to know the PUK assigned to the SmartCard if you want to
re-initialise a previously initialised SmartCard.
► Enter the PUK.
When the following appears:
• ACCESS DENIED = You have entered an invalid PUK. After six failed attempts,
the SmartCard will be blocked and can no longer be used.
► Enter the new PUK as follows.
Enter new PUK:
Confirm new PUK:
A number with 4 to 8 digits is acceptable for the new PUK. For security
reasons, we recommend that you change the PUK for every SmartCard,
and use an 8-digit number each time.
► Re-enter the new PUK to confirm.
When the following appears:
• PIN/PUK do not match = You have confirmed the PUK incorrectly. You will then
be requested to re-enter and reconfirm the new PUK.
F9,function key F5,function key F6,function key F7,function key F8,function key F10,functionkey
Instructions on how to initialise an additional SmartCard can be found in Section "".
76
Installed
[Enter]
[Allowed]
[Always required]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
Item Specific Help
Allows to deactivate
The smartcard security.
ATTENTION:
Always check the BIOS
password settings after
uninstalling
SystemLock.
NOTICE:
Reinstalling a SinglePC
implies re-initializing
all of your smartcards
Fujitsu Technology Solutions