Using the keypad interface
5
12
Siemens AB
Security Products
Possible values are:
→ EXIT to exit programming
→ BACK to return to previous menu
8 BOTTOM LINE
In the IDLE state, this line is blank.
OF DISPLAY
In Programming mode, this line displays options available to the user. These
options align over the left and right soft keys for selection as required.
9 TOP LINE
In the IDLE state, displays the current date and time. In Programming mode,
this line displays one of the following:
OF DISPLAY
→ The programming feature to be selected
→ The current setting of the selected feature
→ The nature of the current alert during an alert condition. (See Prioritization of
Display Messages below)
Prioritization of display messages
Trouble messages and alerts are displayed on the keypad in the following order:
Zone
–
Alarms
–
Tamper
–
Trouble
Area Alerts
–
Fail to set
–
Entry time out
–
Code tamper
System Alerts
–
Mains
–
Battery
–
PSU fault
–
Aux fault
–
External bell fuse
–
Internal bell fuse
–
Bell tamper
–
Cabinet tamper
–
Aux tamper 1
–
Aux tamper 2
–
Wireless jamming
–
Modem 1 fault
–
Modem 1 line
–
Modem 2 fault
–
Modem 2 line
–
Fail to communicate
–
User panic
–
XBUS cable fault
–
XBUS communications fault
–
XBUS mains fault
–
XBUS battery fault
–
XBUS power supply fault
A6V10209178
26.09.2011