Event Log; Chime - Siemens SPCK 420 User Manual

User programming via the keypad
6
User Menus
6.2.5.4
6.2.5.5
6.2.6
6.2.7
22
Siemens AB
Security Products
AUDIBLE OPTIONS
The audible options are applied as indicators within a walk test.
To set the audible options:
1. Scroll to AUDIBLE OPTIONS.
2. Press SELECT.
3. Scroll to one of the following options: ALL, INT BELL, EXT BELL, KEYPAD
4. Press SAVE.
5. Press BACK to exit.
SEISMIC TEST
To perform a seismic test:
1. Scroll to TEST > SEISMIC TEST.
2. Press SELECT.
3. Select TEST ALL AREAS, or select an individual area to test.
4. If you select an individual area to test, you can select either TEST ALL ZONES
or select a specific seismic zone to test.
 The message 'SEISMIC TEST' is display on the keypad while the test is
being performed,
 If the test fails, the message 'SEISMIC FAIL' is displayed. If the "i" or VIEW
key is pressed, a list of the failed zones is displayed which can be scrolled
through.
 If the test succeeds, 'SEISMIC OK' is displayed.
See also Seismic Sensor Testing.

EVENT LOG

Recent events on the system are displayed in the EVENT LOG option. Events flash
in one second intervals.
1. Scroll to EVENT LOG and press SELECT.
2. To view an event from a particular date, enter the date with the numeric keys.
 The most recent events are displayed on the bottom line of the display. All
previous events are displayed for one second in turn.

CHIME

The chime function can be enabled or disabled on all zones where the chime has
been programmed as an audible alert feature.
To enable or disable the chime function:
1. Scroll to CHIME and press SELECT.
2. Toggle between ENABLED and DISABLED for the chime.
A6V10209178
26.09.2011