GE MDS SD Series Reference Manual page 84

Saving/Restoring
Configuration Files
76 SD Series Ref. Manual (Packet & Transparent Mode)
defining the settings for each radio. Site-specific settings or exceptions
can still be made using the menu system, but the use of the configuration
file greatly shortens the time needed to program a radio.
Figure 58. Configuration Management Menu
To save or restore a configuration file, select
menu. The screen shown in Figure 59 appears.
Figure 59. Save/Restore Configuration Menu
To restore the radio's configuration settings to the factory defaults,
proceed as follows:
1. Select
Restore to Factory Defaults
2. A challenge message appears briefly, informing you that a reboot is
required if the operation is performed. Answer
ceed.
3. The system resets all configuration parameters to the factory default
settings and a confirmation message appears.
Save/Restore Config
from the menu.
if you wish to pro-
y
MDS 05-4846A01, Rev. C
from the