Performing Remote Management - GE MDS SD Series Reference Manual

78 SD Series Ref. Manual (Packet & Transparent Mode)
Figure 60. TFTP Configuration File Menu
• —Select this item from the menu and enter a valid
Host IP Address
IP address for the host computer (where the configuration file
resides).
• —Select this item from the menu and enter the exact
Filename
name of the configuration text file that will be used by the radio
to import or export configuration data.
• —This parameter determines the amount of time in
Timeout (sec)
seconds that the radio should wait for a TFTP server to respond.
The default setting is 10 seconds, and will not require any change
in most cases. If a change is needed, select the item and enter a
new timeout value.
•
Export Config File
a TFTP server. (This process requires that a TFTP server be prop-
erly connected and configured.)
•
Import Config File
the TFTP server. (This process requires that a TFTP server be
properly connected and configured.)

Performing Remote Management

The transceiver has the facilities for reprogramming key settings of
other radios in the network. These functions are contained on the
Remote Management Menu as shown in Figure 61.
Invisible place holder
—Exports the configuration file from the radio to
—Imports a configuration file to the radio from
MDS 05-4846A01, Rev. C