Fujitsu s3-0801 User Manual page 23

Assigning device types
To access the OSD Devices dialog box:
1. Activate the OSD and click Setup - Devices to open the Devices dialog box.
The Modify button is available only if a configurable switch is selected.
When the switch discovers a cascaded switch, the numbering format changes
from a s3-0801/1601 port only to [s3-0801/1601]-[switch port] to accommodate
each target device under that switch.
For example, if a switch is connected to s3-0801/1601 port 6, each target device
connected to it would be numbered sequentially. The target device using s3-
0801/1601 port 6, switch port 1, would be 06-01, the target device using s3-
0801/1601 port 6, switch port 2, would be 06-02, and so on.
To assign a device type:
1. In the Devices dialog box, select the desired port number.
2. Click Modify to open the Device Modify dialog box.
3. Choose the number of ports supported by your switch and click OK.
4. Repeat steps 1-3 for each port requiring a device type to be assigned.
5. Click OK in the Devices dialog box to save settings.
Changes made in the Device Modify dialog box are not saved to the switch until you click
OK in the Devices dialog box.
Assigning target device names
Use the Names dialog box to identify target devices by name rather than by port
number. The Names list is always sorted by port order. You can toggle between
displaying the name or the EID number of each IQ module, so even if you move
the target device to another port, the name and configuration will be recognized
by the switch.
When it is initially connected, a target device will not appear in the Names list until it is
turned on. Once an initial connection has been made, it will appear in the Names list
even when turned off.
To access the OSD interface Names dialog box, activate the OSD interface and
click Setup - Names.
590-1035-640A
3.2 Setup Dialog Box Functions
17