Fujitsu s3-0801 User Manual page 38

4. Web Interface Operations
Viewing and configuring cascaded switch connections
The Cascaded Devices window lets you view the cascaded switches in your
system. Clicking on a switch name displays a window that allows you to change
the Name or Number of Channels.
To configure a cascaded switch connection:
1. Click the Configure tab in the OBWI, then click Servers-Cascade Devices in
the left column.
2. Click the name of the switch you want to configure and type the new name
for the cascaded device.
3. Type the number of channels, between 4-24, for the switch.
4. When you have finished configuring the switches, click Save to save the new
settings.
-or-
Click Cancel to exit without saving.
Viewing the IQ modules and IACs
Selecting Servers - IQs lets you view IQ modules and SMB adapters in your
system, their path, Electronic ID number (EID), their type and the device to which
it is connected.
You can also view the IQ module status. A green circle indicates that the IQ
module is online. A yellow circle indicates the IQ module is being upgraded and
a red X indicates that the IQ module is offline. To clear offline IQ modules, click
Clear Offline IQs and click OK when prompted. The Clear Offline IQs button is
only available for switch administrators.
It is not possible to clear offline IQ modules that are attached to a cascaded switch.
User access rights will also be updated to remove the servers associated with the
cleared offline IQ modules.
The IQ Language drop-down menu allows you to set language and keyboard
parameters for all the Sun/USB IQ modules being used with the switch. The IQ
Language drop-down menu is only available for switch administrators.
The Reboot Required button will only appear if a reboot is required.
32
590-1035-640A