Toro Power Clear 621 QZR Operator's Manual page 19

Figure 42
1. Arrows
3. Rotate the discharge chute so that it faces straight
ahead and the arrow on the back of the discharge chute
aligns with the arrow on the shroud (Figure 43).
Figure 43
4. Hold the discharge chute in the straight-ahead position,
pull the lower cable casing downward until you remove
the slack in the cable, and tighten the screw on the
lower cable clamp securely (Figure 44).
1. Lower cable casing
5. Pull the upper cable casing forward until you remove
the slack in the cable, and tighten the screw on the
upper cable clamp securely (Figure 45).
1. Upper cable casing
Note: Do not over-tension the cables. If the cables
are over-tensioned, the Quick Shoot will be hard to
operate.
19
Figure 44
Figure 45