Power Supply; Cables - Silvercrest Home Tech User Manual And Service Information

English

Power supply

Only use the 2.1 loudspeaker system if the voltage stated on the rat-
ing plate complies with the voltage of your mains socket (the rating
plate is attached on the underside of the subwoofer). Incorrect volt-
age can irreparably damage the device.
The mains switch on the subwoofer does not disconnect the device
completely from the mains power supply. To completely disconnect
the device from the mains power supply, always remove the mains
plug from the mains socket. For this reason the subwoofer should be
positioned so that direct and unobstructed access to the mains socket
is ensured and the mains plug can be immediately pulled out in an
emergency.
To prevent a fire hazard if the device is not in use for a prolonged pe-
riod (e.g. during holidays), the mains plug should always be discon-
nected from the mains socket.
Before stormy weather when there is the risk of lightning, disconnect
the device from the mains power supply.

Cables

Always hold cables by the plug and never pull on the cable itself.
Never touch the mains cable with wet hands as this may cause an
electric shock.
Never place the device itself, furniture or other heavy objects on the
cables and ensure that the cables are not kinked, especially near the
plugs and the connection sockets.
Never make knots in any of the cables or do not tie them together
with other cables. All cables should be positioned so that nobody can
trip over them and they cannot cause an obstruction. A damaged
mains cable can cause fire or an electric shock. Inspect the mains
cable from time to time. Do not use adapter plugs or extension cables
that do not comply with applicable safety standards, and do not make
any alterations to the mains cable or mains plug!
5
Silvercrest 2.1-Speaker System SP2010