Motorola V3 Service Manual page 39

Level 1 and 2 Service Manual
G
6809497A15-A
8. To replace, align the display assembly to the flip housing.
The FPC (flex) is easily damaged. Exercise extreme care when handling.
9. Lower the display assembly onto the flip housing.
10. Insert the speaker flex ZIF connector into the ZIF socket. Lock the ZIF
connector with the pointed end of the disassembly tool.
11. Carefully press the camera connector into its socket on the display assembly.
12. Carefully seat the display flex connector to the socket on the flip assembly.
13. Carefully align the flip flex assembly connector and seat it in it's socket on the
the display assembly.
14. Carefully lower the display assembly onto the flip assembly. Be careful not to
damage the display flex or flex connector while reassembling the display lens
assembly.
15. Replace the flip assembly cover, flip assembly, keypad assembly, transceiver
board, rear housing, antenna, SIM, battery, and battery cover as described in
the procedures.
January 31, 2006
Disassembly
39