Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fujitsu ESPRIMO P4 Series
Summary of Contents for Fujitsu ESPRIMO P4 Series
- Page 1 System Operating Manual ESPRIMO P4xx / P5xx / PH3xx...
- Page 2 For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your sales partner • Your sales office We hope you really enjoy using your new Fujitsu system.
- Page 4 You will find more information at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26361-K1017-Z320-1-7619, edition 2...
- Page 5 ESPRIMO P4xx / P5xx / PH3xx Operating Manual Your ESPRIMO Important notes Getting started Operation Troubleshooting and tips System expansions Technical specification Index...
- Page 6 ESPRIMO is a registered trademark of Fujitsu Technology Solutions GmbH. Windows 7, Windows Vista and Windows XP are registered trademarks of Microsoft Corporation. PS/2 is a registered trademark of International Business Machines, Inc. Pentium is a registered trademark of Intel Corporation, USA.
-
Page 7: Table Of Contents
Installing new software ..............27 Fujitsu Technology Solutions... - Page 8 Index ................. . 45 Fujitsu Technology Solutions...
-
Page 9: Your Esprimo
Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD. You can access and view the required information using the Acrobat Reader program, which is also included on the DVD. You can of course also print out a copy of the manual if you prefer. Fujitsu Technology Solutions... -
Page 10: Notational Conventions
Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual Indicates a key on the keyboard, e.g: Indicates terms and texts that are emphasised or highlighted, e.g.: Do This font not switch off the device Fujitsu Technology Solutions... -
Page 11: Important Notes
If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. Fujitsu Technology Solutions... -
Page 12: Cleaning The Device
Contact the corresponding government office in the respective country for current information on possible operating restrictions. If your country is not included in the list, then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country. Fujitsu Technology Solutions... -
Page 13: Fcc Compliance Statement
• Consult the dealer or an experienced radio/TV technician for help. Fujitsu Technology Solutions GmbH is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu Technology Solutions GmbH. -
Page 14: Getting Started
Drives and boards If you have received drives or boards with your device, please do not install them until after first-time setup. How to install drives and boards is described in the "System expansions", Page 29 chapter. Fujitsu Technology Solutions... -
Page 15: Setting Up The Device
Use the device only in the vertical operating position. Connecting the device to the mains supply Mainsadapter ► Connect the power cable to the device (1). ► Plug the power plug into a grounded mains outlet (2). Fujitsu Technology Solutions... -
Page 16: Connecting External Devices
► Switch off all affected devices. Cable, ► Remove all power plugs from the grounded mains outlets. ► Unplug all data communication cables from the appropriate sockets. ► Disconnect all of the cables from the device and from the external devices. Fujitsu Technology Solutions... -
Page 17: Ports On The Device
Keyboard port, purple (optional) (optional) Keyboardport Mouseport PS/2mouseport e-SATA port S/PDIF port e-Sata S/PDIF Serial port, turquoise Serialport Some of the peripherals require special software (e.g. drivers) (refer to the documentation for the peripheral and operating system). Fujitsu Technology Solutions... -
Page 18: Connecting A Monitor
BIOS Setup in order to free the IRQ12 for a different application. ► Connect the PS/2 mouse to the PS/2 mouse port of the device. PS/2mouse, Connecting, PS/2mouse, ► Switch your device on again. Fujitsu Technology Solutions... -
Page 19: Connecting The Keyboard
The devices connected to the serial interface require drivers. Your operating system already includes many drivers. If the required drive is missing, install it. The latest drivers are usually available on the Internet or will be supplied on a data carrier. Fujitsu Technology Solutions... -
Page 20: Connecting External Devices To The Usb Ports
Plan a reasonable amount of time for this, as this process must not be interrupted. You may need the licence number for Windows during the installation. The licence number is located on a sticker on your device. Fujitsu Technology Solutions... -
Page 21: Switching On Monitor And Device
► If anything is unclear regarding the data you are asked to input, read the online Help in your operating system. You will find more information on the system, as well as drivers, utilities and updates on the "Drivers & Utilities" DVD and on the Internet under "http://ts.fujitsu.com/support/". Fujitsu Technology Solutions... -
Page 22: Operation
The main switch and the ON/OFF switch do not disconnect the device from the mains voltage. To completely disconnect from the mains voltage, remove the power plug from the power socket. ► If necessary, switch the monitor off (see the operating manual for the monitor). Fujitsu Technology Solutions... -
Page 23: Indicators On The Device
• The indicator is not lit: The device is switched off. Hard disk indicator The indicator lights up blue when the hard disk drive in the device is being accessed. Fujitsu Technology Solutions... -
Page 24: Keyboard
The illustrated keyboard is an example and may differ from the model you use. 1 = Function keys 4 = Cursor keys 2 = On/off switch (optional) 5 = Numeric keypad (calculator keypad) 3 = Alphanumeric keypad Fujitsu Technology Solutions... -
Page 25: Important Keys And Keyboard Shortcuts
The Ctrl key is also called the "Control" or "Control key". Ctrl+Alt+Del Ctrl+Alt+Del Keys keyboardshortcuts Windows security/Task-Manager Ctrl This key combination opens the Windows Security/Task Manager window. Fujitsu Technology Solutions... -
Page 26: Settings In Bios Setup
(2) and a padlock and chain which you have connected to a fixed object beforehand. Lead-sealing To prevent unauthorised persons from opening the system unit, the casing can be lead-sealed. To do this, feed the sealing chain through the holes (2) and seal the chain with the lead seal. Fujitsu Technology Solutions... -
Page 27: Bios Setup Security Functions
"BIOS Setup" manual. Access authorisation via SmartCard Securityfunctions, Accesspermission,SmartCard In systems equipped with a SmartCard reader, access can be restricted to those users who have a corresponding SmartCard. Fujitsu Technology Solutions... -
Page 28: Troubleshooting And Tips
Internal power supply overloaded. ► Pull the power plug of the device out of the mains outlet. ► Wait a moment. ► Plug the power plug into a properly grounded mains outlet again. ► Switch the device on. Fujitsu Technology Solutions... -
Page 29: The Device Cannot Be Switched Off With The On/Off Switch
► Switch on the monitor and the device. Monitor cable not connected ► Switch off the monitor and the device. ► Check that the monitor cable is properly connected to the device and monitor. ► Switch on the monitor and the device. Fujitsu Technology Solutions... - Page 30 ► Select Safe Mode or Safe Mode with Network. ► Go to Start – Control Panel – Appearance and Personalization – Display to enter the correct values for the connected monitor as described in the operating manual of the monitor. Fujitsu Technology Solutions...
-
Page 31: No Mouse Pointer Displayed On The Screen
When installing programs or drivers, important files may be overwritten and modified. To be able to access the original data in the event of any problems following installation, you should backup your hard disk prior to installation. Fujitsu Technology Solutions... -
Page 32: Restoring Hard Disk Contents
"Recovery DVD" (delivered with your system). Tips Topic Out of system resources ► Close unnecessary applications. ► Run the applications in a different order. Other manuals Further manuals are provided as PDF files on the "Drivers & Utilities" DVD. Fujitsu Technology Solutions... -
Page 33: System Expansions
An update of the BIOS may be required for a system expansion or hardware upgrade. Further information can be found in the BIOS help section or if necessary in the Technical Manual for the mainboard. Fujitsu Technology Solutions... -
Page 34: Information About Boards
The equipment and tools you use must be free of static charges. • Only touch or hold the boards by the edge or, if present, at the areas marked green (Touch Points). • Never touch pins or conductors on boards fitted with ESDs. Fujitsu Technology Solutions... -
Page 35: Opening The Casing
► Remove any connected wires which are in the way. ► Lay the device on its side in the manner shown below. ► Remove the casing screws (1). ► Slide the side cover from the casing in the direction of the arrow (2). Fujitsu Technology Solutions... -
Page 36: Closing The Casing
• two drive bays for non-accessible 3 inch drives "Accessible drives" are e.g. DVD or CD ROM drives, into which a data medium can be inserted from outside. "Non-accessible drives" are for example hard disk drives. Fujitsu Technology Solutions... -
Page 37: Installing And Removing The Accessible 5
► Working from behind, slide the drive a short distance out of the bay in the direction of the arrow (2). The drive now protrudes slightly out of the casing. ► Pull the drive out of the casing (2). ► If necessary, make the required settings on the remaining hard disk drive. Fujitsu Technology Solutions... -
Page 38: Installing An Accessible Drive
► Plug the data and the power supply connectors into the drive. Make sure the polarity is correct. ► Close the casing (see "Closing the casing", Page 32). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu Technology Solutions... -
Page 39: Installing And Removing An Accessible 3
► Fasten the drive into place with the screws (2). ► Plug the data and the power supply connectors into the drive. Make sure the polarity is correct. ► Close the casing (see "Closing the casing", Page 32). Fujitsu Technology Solutions... -
Page 40: Removing An Accessible Drive
► Disconnect all cables connected to the drive (data cable, power supply cable). ► Remove the screws (1). ► Slide the drive out of the bay from behind, in the direction of the arrow (2). ► Close the casing (see "Closing the casing", Page 32). Fujitsu Technology Solutions... -
Page 41: Installing And Removing The Hard Disk Drive
"Closing the casing", Page 32). It may be necessary to modify the entry for the remaining drives in the BIOS Setup. You will need a SATA cable to install a second hard disk on the listed device variants. Fujitsu Technology Solutions... -
Page 42: Installing A Hard Disk Drive
► Press gently against the hard disk drive from below and secure it with the screws (2). ► Connect the cables (data cable, power supply) to the drive. Check that the polarity is correct and do not use any force. ► Close the casing (see "Closing the casing", Page 32). Fujitsu Technology Solutions... -
Page 43: Installing And Removing A Board
► Remove the cover plate from the casing in the direction of the arrow (2). ► Remove the screw on the slot cover (1). ► Pull the slot cover out of the slot in the direction of the arrow (2). Fujitsu Technology Solutions... - Page 44 "Closing the casing", Page 32). If you have installed or removed a board, please check the relevant PCI slot settings in the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI board documentation. Fujitsu Technology Solutions...
-
Page 45: Board Removing
► Disconnect the cables connected to the board. ► Remove the screw on the board (1). ► Pull the board out of the slot in the direction of the arrow (2). ► Place the board in suitable packaging. Fujitsu Technology Solutions... -
Page 46: Mainboard Expansions
Processor, replacing ► Open the casing (see "Opening the casing", Page 31). Processor,replacing ► Upgrade the processor according to the description in the manual for the mainboard. ► Close the casing (see "Closing the casing", Page 32). Fujitsu Technology Solutions... -
Page 47: Replacing The Lithium Battery
► Press the catch in the direction of the arrow (1). The battery jumps out of the holder slightly. ► Remove the battery (2). ► Push the new lithium battery of the identical type into the holder (3) and press it down until it engages. Fujitsu Technology Solutions... -
Page 48: Technical Specification
Clearance required to ensure adequate ventilation: without air vents min. 10 mm with air vents min. 200 mm The data sheets for these devices contain further technical data. The data sheets can be found on our website at "http://ts.fujitsu.com". Fujitsu Technology Solutions... -
Page 49: Index
Function keys 20 PS/2 keyboard 15 PS/2 mouse 14 USB keyboard 15 Getting started 10 Contents of delivery 10 Cord see Cable 12 Ctrl+Alt+Del 21 Hard disk drive, Cursor keys 20 installing 37–38 removing 37 replacing 37 Fujitsu Technology Solutions... - Page 50 LAN port 13 PS/2 mouse port 13 Lead-sealing 22 PS/2 mouse, Line in 13 connecting 14 Line out 13 port 14 Lithium battery 42 Lithium battery, replacing 43 Recycling 8 Low voltage directive 8 Replacing, lithium battery 43 Fujitsu Technology Solutions...
- Page 51 16 Servicing 29 connecting keyboard 15 Setup, connecting the mouse 14 see BIOS Setup 22 User Documentation DVD 8 Software, installing 16–17 System expansion 29 Workstation 11 System settings, BIOS Setup 22 System unit, see Device 8 Fujitsu Technology Solutions...