Page 2
Thank you for buying an innovative product from Fujitsu. Latest information about our products, useful tips, updates etc. is available on our website: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: •...
Page 5
FUJITSU Desktop ESPRIMO P6012 / P7012 / P9012 Operating Manual Your ESPRIMO Ports and Operating Elements Important notes Getting started Operation Troubleshooting and tips System expansions and repairs Technical data Index...
Page 6
Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...
This chapter presents the individual hardware components of your device. This will provide you with an overview of the ports and operating elements on the device. Please familiarise yourself with these components before you start to work with the device. Fujitsu...
Depending on variants and configuration levels, your device features the following slots on the back for module or interface expansions: • 3 full-height slots (FUJITSU Desktop ESPRIMO P7012 and P9012) • 2 full-height slots (FUJITSU Desktop ESPRIMO P6012) The devices ESPRIMO P7012 and ESPRIMO P9012 also have Flex I/O with one of the following connection types: •...
Page 14
4 = Screen socket (AC OUT, optional) 5 = Connections, depending on the configuration level (see "Ports on the device", Page Ventilation openings on graphics cards can become hot during operation. Therefore, do not touch the graphics card during operation. Fujitsu...
If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. Fujitsu...
Use disinfectant wipes to clean the keyboard and the mouse. Energy-saving, disposal and recycling Disposal Saving energy Recycling You can find information on these subjects in the "Environment and Energy Information" manual or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Fujitsu...
Drives and boards If you have received drives or boards with your device, please do not install them until after first-time setup. The installation of drives and modules is described in the "System Upgrades and Repairs" manual. Fujitsu...
Do not stack several devices on top of each other. Do not expose the device to extreme ambient conditions (see "Technical data", Page section "Ambient conditions"). Protect the device against dust, humidity and heat. Fujitsu...
Russia and the Commonwealth of Independent States (CIS), large parts of Europe, parts of South America, the Middle East, parts of Africa, Hong Kong, India, large parts of South Asia. UK, Ireland, Malaysia, Singapore, parts of Africa China, Australia, New Zealand Fujitsu...
Do not connect or disconnect cables during a thunderstorm. Always take hold of the actual plug when disconnecting a cable. Never pull the cable! To ensure that your device works properly, use only the supplied connection cable or only use a high-quality connection cable. Fujitsu...
USB 3.2 Gen2x2 - Universal Serial Bus, type C: black Mouseport PS/2mouseport DVI-D monitor port PS/2 keyboard port, purple DVI-Imonitorport Keyboardport Display port VGA monitor port, blue DP1 / DP2 Displayport Monitorport Serial port HDMI HDMI port Serialinterface LAN port LANport Fujitsu...
1 = Screen connections of the mainboard 3 = Flex I/O monitor connection 2 = Screen connections of the graphics card ► Follow the instructions contained in the monitor manual to prepare the monitor for operation (e.g. connecting cables). Fujitsu...
Page 23
► Depending on your device configuration level, plug the monitor power cable into either the monitor socket of the device (1) or a grounded power outlet (2). When you connect the monitor to the monitor socket of the device, it automatically switches off as soon as the device switches off. Fujitsu...
► Plug the flat rectangular USB connector of the keyboard cable into a USB port of the device. USBport Connecting a PS/2 keyboard Use the supplied keyboard cable only. ConnectingaPS/2keyboard Connecting, ► Plug the round connector of the keyboard cable into a keyboard port of the device. Keyboard, Fujitsu...
External USB devices which you connect to one of the USB ports don’t usually need their own drivers because the software required is already included in the operating system. If the device requires separate software, please follow the instructions in the manufacturer’s documentation. Fujitsu...
All necessary measures to protect property and data have been taken (see "Property and data protection", Page 35). The cable cover is constructed as follows: a = Locking elements c = Cable opening b = Guide rail ► On devices with a housing lock: Unlock the casing. Fujitsu...
Page 27
Getting started ► Pull the latch and lift the side panel off the housing (1). Fujitsu...
Page 28
Getting started ► Insert the guide rail (b) in the corresponding metal tab (2) to the left of the connections. The cable opening (c) faces downwards. ► Route the cables out through the cable opening (c) in the cable cover. Fujitsu...
Page 29
Getting started ► Press the locking elements (a) into the corresponding openings (3) on the outer right side of the housing. The cable cover is positioned: Fujitsu...
Page 31
Getting started ► Close the housing (4). ► On devices with a housing lock: Lock the casing. The cable cover is secured: Fujitsu...
Page 32
Getting started Further secure the cable cover with the side panel to prevent unauthorised removal (see "Property and data protection", Page 35). Fujitsu...
Contact your network administrator if you have any questions about these settings. When you switch on the device for the first time, the supplied software is installed and configured. Plan a reasonable amount of time for this, as this process must not be interrupted. Fujitsu...
You will find more information on the system, as well as drivers, utilities and updates on the optional "Drivers & Utilities" DVD and on the Internet at "http://www.fujitsu.com/fts/support". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".
The ON/OFF switch does not disconnect the device from the mains voltage. For complete disconnection from the mains voltage, you must pull the mains plug out of the socket. ► If necessary, switch the monitor off (see the operating manual for the monitor). Fujitsu...
The device is switched off or disconnected from the mains. If the device is ready for operation, it can be switched on with the ON/OFF switch. Hard disk indicator The indicator lights up when the hard disk drive of the device is accessed. Fujitsu...
With some keyboards the ON/OFF switch can only be used with an ACPI (Advanced Configuration and Power Management Interface). Otherwise the key is inoperative. The mainboard must support this function. Keys, Keys, Keys, Enter key confirms the highlighted selection. The Enter key is also referred to as the "Return" key. Fujitsu...
Setup, In the BIOS Setup, you can set system functions and the hardware configuration of the device. At delivery, the default entries are effective (see BIOS manual or mainboard manual). You can customize these settings in the BIOS Setup. Fujitsu...
Unauthorised opening of the housing can also greatly endanger third parties (electric shock, risk of fire, etc.). Use the measures described below to keep unauthorised persons from accessing the interior of the housing. Device, Device, Casing, Lead-sealing Anti-theftprotection KensingtonLock Chain 1 = Holes for a padlock Fujitsu...
Page 40
Security Lock. Lead-sealing To prevent unauthorised persons from opening the casing, the casing can be lead-sealed. To do this, feed the sealing chain through the holes (1) and seal the chain with the lead seal. Fujitsu...
Key turned towards the closed lock: The device is locked. • Key turned towards the open lock: The device is unlocked. Locking the casing ► Turn the key towards the closed lock Unlocking the casing ► Turn the key towards the open lock Fujitsu...
Erase Disk function for hard disks and solid state drives EraseDisk Erase Disk is a solution integrated in the firmware of FUJITSU desktops (UEFI: Unified Extensible Firmware Interface) to delete all data from a hard disk or Solid State Disc drives (SSDs).
► Contact the Service Desk responsible for your country for clarification of the problem: "http://support.ts.fujitsu.com/contact/servicedesk". When you do this, please have ready the ID number and serial number of your system.
► Restart the system. Incorrect setting for the monitor ► Press while the system is booting. ► Start the system in Safe Mode. ► Set up the monitor as described in the documentation for your operating system and monitor. Fujitsu...
Installing new software When installing programs or drivers, important files may be overwritten and modified. To be able to access the original data in the event of any problems following installation, you should backup your hard disk prior to installation. Fujitsu...
Servicing Information on system expansions and repairs can be found on the Internet in the "System Expansions and Repairs" manual at "http://www.fujitsu.com/fts/support". Operations that are distinguished in the manual as Only For Service, such as repairs to the device, may only however be performed by authorised service technicians.
2.0 – 1.0 A FUJITSU Desktop 300W (E642-V20) ESPRIMO P7012 FUJITSU Desktop ESPRIMO P6012 Dimensions Width/depth/height without cable cover: 180 mm x 304 mm x 374 mm / 7,09 inch x 11,97 inch x 14,72 inch Width/depth/height with cable cover (optional):...
Page 49
Technical data The data sheets of these devices contains further technical data. The data sheets can be found on our website at "http://www.fujitsu.com/fts/". Fujitsu...
first time 29 Interfaces 17 data delete 38 Data protection 35 Device Kensington Lock 35 setting up 14 Keyboard 33 Switching on 31 Keyboard port 17 Device drivers keyboard shortcuts 34 Parallel port 21 Keyboard shortcuts 33 Fujitsu...
Page 51
Mouse port 17 Setup, Mouse, see BIOS Setup 34 connecting 20 SmartCard reader, operating 38 Software, Note installing 29–30 safety 11 System expansion 43 Notes System settings, important 11 BIOS Setup 34 Numeric keypad 33 System unit, see Device 12 Fujitsu...
Page 52
Index USB port 20 Transportation 11–12 USB port, connecting devices 21 connecting keyboard 20 connecting the mouse 20 Universal Serial Bus 17 Upgrades, device 43 USB devices, Workstation 14 connecting 21 Fujitsu...