Setting Up The Device - Fujitsu ESPRIMO P6012 Operating Manual

Getting started

Setting up the device

Device Ergonomic Workstation
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on your device location, disturbing vibrations and noises may occur. In
order to avoid this, a minimum distance of 10 mm / 0.39 inch to other devices or
objects should be maintained on housing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
For ventilation surfaces, a minimum distance of 200 mm / 7.87 inch
from the device must be maintained.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see
section "Ambient conditions"). Protect the device against dust, humidity and heat.
14
"Technical data", Page
Fujitsu
44,