Ports On The Device - Fujitsu ESPRIMO P6012 Operating Manual

Ports on the device

Interfaces Device, Externaldevices,
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
The maximum possible configuration level of the device is described below.
The connections on the device depend on the ordered variant and its configuration
level, and can therefore defer from the table below (e.g. Flex I/O connections).
Some of the connected devices require special drivers (see the
documentation for the connected device).
The USB speeds are indicated on the information plate.
Combined headphone and
microphone port, black (Line
In/Out)
Audio output (Line Out), light
green
LineOut Audiooutput
USB 3.2 Gen1 - Universal
Serial Bus, Type A: blue, Type
C: black
UniversalSerialBus
PS/2 mouse port, green
PS/2mouseport Mouseport
DVI-D monitor port
DVI-Imonitorport
VGA monitor port, blue
Monitorport
Serial port
Serialinterface
LAN port
LAN
LANport
Fujitsu
Audio input (Line In), light blue
LineIn Audioinput
USB 2.0 - Universal Serial Bus, type A,
black
USB 3.2 Gen2 - Universal Serial Bus,
type A: blue, type C: black
USB 3.2 Gen2x2 - Universal Serial Bus,
type C: black
PS/2 keyboard port, purple
Keyboardport
Display port
DP1 / DP2
Displayport
HDMI HDMI port
Getting started
17