Command Line Interface
Restrictions
Example usage:
To reboot the Switch:
DGS-1210-24:admin#reboot
Are you sure you want to proceed with the system reboot?(y/n) y
% Device will reboot, please wait a few minutes to re-login.
Success.
DGS-1210-24:admin#
reset config
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To reset all of the Switch's parameters to their default values:
DGS-1210-24:admin#reset config
% Device will reboot after reset configuration successfully.
DGS-1210-24:admin#
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the IP interface settings:
None.
This command is used to reset the Switch's configuration to the
factory default settings.
res et c onfig
All the Switch's configurations will be reset to the default settings.
None.
None.
This command is used to display the configuration of the IP
interface on the Switch.
s how ipif
The s how ipif command displays the current IP interface
configuration of the switch.
None.
None.
9
6
9
6
D-Link Web Smart Switch User Manual