Configuration
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Admin State: Use the drop-down menu to enable or disable Port Security (locked MAC address table for the
selected ports).
Max Learning Address (1-64): Specifies the maximum value of port security entries that can be learned on
this port.
Click Apply for the settings to take effect.
Security > DoS Attack Prevention
The user can configure the prevention of each DoS attacks. The packet matching will be done by hardware.
For a specific type of attack, the content of the packet will be matched against a specific pattern.
Figure 4.73 – Security > Port Security
Figure 4.74 – Security > DoS Attack Prevention
6
4
6
4
D-Link Web Smart Switch User Manual