Appropriate Use; Setting Up The Speaker System - Silvercrest PAC-10 Instruction Manual And Safety Instructions

3. Appropriate Use

The Silvercrest loudspeaker system is a compact PA system, in the form of a trolley.
"PA" is the abbreviation for "public address" and describes the intended use of the equipment: to amplify vocals,
musical instruments and, where required, playback from an audio device (MP3 player or other) and to reproduce
this over loudspeakers, so that all listeners will hear the sound adequately.
The performance of this loudspeaker system is adequate for home use, for the rehearsal room and for smaller live
performances by soloists, entertainers and bands, e.g. in a restaurant.
The loudspeaker system incorporates a mixer console, a Hall Effect, a loudspeaker box and an amplifier.
The volume and tone of the different input signals (e.g. vocals, instruments, playback, etc.) can be manipulated
using the mixer console so that they are reproduced as a well-balanced and enjoyable sound.
The Hall Effect enables you to manipulate the sound characteristics positively to improve the overall sound
impression.
The loudspeaker box, which is turned towards the audience, reproduces the signal.
There is a flanged bush located on the underside of the loudspeaker system for better positioning.
Using the flanged bush, the loudspeaker system can be placed on a box stand with a crossbar diameter of 35 mm
(not included in the product contents).
The system has two rollers and a telescopic handle for easy transport.
Hence, the complete system can be towed like a trolley case.

4. Setting up the Speaker System

- Take the loudspeaker system and the power cable supplied out of the carton.
- Position the system in a suitable place. (Observe the Safety Information while doing so.)
- Ensure that all controls are set to zero.
- First, connect the power cable to the loudspeaker system and then to an appropriate power supply
(230 V / 50 Hz).
- Now turn on the power switch. This will display a red light when operational.
4