Led Indicators; Summary Of Features - D-Link DFE-680TX User Manual

Fast ethernet pc card for cardbus

Hide thumbs Also See for DFE-680TX:

Table of Contents

LED Indicators

The media coupler features three LED indicators:

• 10/100 Indicator: Steady green indicates Fast Ethernet selected. Dark indicates

10Mbps Ethernet selected.

• Half /Full Indicator:

Steady green indicates Full-Duplex selected.

Dark indicates Half-Duplex selected.

• Ln/Act Indicator:

Steady green indicates that there is good linkage to the network ("Linkage" state,

quiescent). Flashing green indicates that the DFE-680TX is transmitting or

receiving ("Activity" state). In 10Mbps mode, flashing will be regular and

periodic. In 100 Mbps mode, flashing may be irregular, with longer dark periods

during heavy traffic activity.

Features of Model DFE-680TX 10/100 Ethernet PC Card:

• 100Mbps and 10Mbps data rates in compliance with IEEE 802.3

• Ethernet standards 100Base-TX and 10Base-T

• Complies with PCMCIA V2.x, JEIDA V4.x, and 32-Bit

• CardBus Standards

• CardBus standard 68-pin front-end connector

• 15-pin back-end connector for media coupler

• Full-Duplex capable in 10Mbps and 100Mbps modes.

• Autonegotiation per IEEE 802.3u specification

• No manual setup switches –– fully automatic configuration

• Power consumption 2 watts (max.)

Table of Contents