Assigning A Station Number (Not For U.s.); Trunk Flash (Not For Hipath 500); Associated Dialing/Dialing Aid - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Assigning a Station Number
(Not for U.S.)
If this function has been configured (contact the service
personnel), you can selectively assign a specific num-
ber (DID number) to your telephone before making an
external call. The assigned number then appears on the
called party's display.
n
Lift the handset.
Enter the code.
o
Enter the DID number you wish to use.
o
Dial the external number.

Trunk Flash (Not for HiPath 500)

To activate ISDN-type services and features through the
network carrier's analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Precondition: You have set up an external connection
via an analog line.
Enter the code.
o
Enter the service code and/or telephone number.

Associated Dialing/Dialing Aid

If this function has been configured (contact the service
personnel), you can use your telephone as a dialing aid
for other telephones.
n
Lift the handset.
Enter the code.
o w
Enter the internal station number of the party for whom
you want to dial.
o
Enter the number you wish to dial (external number
with external code).
Making Calls
17