Conducting A Conference; Adding Up To Five Parties To The Conference (Initiator Task; Not For Hipath 3300/3350); Leaving A Conference; Ending A Conference (Initiator Only) - Siemens HiPath 500 Operating Instructions Manual

Step by Step

Conducting a Conference

In a conference call, you can talk to as many as four (two
in the case of HiPath 3300/3350) other parties at the
same time. These may be internal or external users.
n
Lift the handset.
o
Call the first party.
Press the key.
o
Call the second station. Announce the conference.
Enter the code.
A tone sounds every 30 seconds to indicate that a
conference is in progress. Contact the service
personnel for instructions on how to turn it off.
If the second party does not answer:
Press the key.
Enter the code or wait two seconds.
or (depending on the configuration)
Press the key twice.
Adding Up to Five Parties to the Conference
(Initiator Task; Not for HiPath 3300/3350)
Press the key.
o
Call the new party. Announce the conference.
Enter the code. etc.

Leaving a Conference

t
Replace the handset.

Ending a Conference (Initiator Only)

Enter the code.
Calling Multiple Parties Simultaneously
19