Basic Operating Instructions; How To Use These Operating Instructions - Siemens HiPath 500 Operating Instructions Manual

Step by Step

Basic operating instructions

How to Use these Operating
Instructions
You will find a graphic representation of the steps in log-
ical sequence in the left column. Below is an explana-
tion of the symbols:
n
Lift the handset (off-hook).
t
Replace the handset (on-hook).
s
Conduct a call.
o
Enter a telephone number or code.
Enter the code.
Press the consultation hold key, signal key, flash key
(not applicable to pulse telephones).
w
You hear a tone.
A long tone (positive confirmation tone) confirms that
you have successfully activated a function or procedure.
A short tone (negative confirmation tone) indicates that
the function or procedure was rejected.
Dial pulsing telephones
=Code
=Code
Basic operating instructions
7