Panasonic EY6535 Operating Instructions Manual
Cordless multi drill & driver
Hide thumbs
Also See for EY6535:
- Operating instructions manual (88 pages) ,
- Operating instructions manual (16 pages)
Table of Contents
Related Manuals for Panasonic EY6535
Summary of Contents for Panasonic EY6535
-
Page 1: Operating Instructions
EY6535.book MULTI Drill & Driver Operating Instructions Model No. : EY6535 IMPORTANT This manual contains safety information. Read manual completely before first using this product and save this manual for future use. SAVE THESE INSTRUCTIONS... -
Page 2: General Safety Rules- For All Battery Operated Tools
EY6535.book 2 GENERAL SAFETY RULES- while tired or under the influence of drugs, alcohol, or medication. FOR ALL BATTERY A moment of inattention while operating OPERATED TOOLS power tools may result in serious per- sonal injury. WARNING! 7) Dress properly. Do not wear loose Read and understand all instructions. -
Page 3: Specific Safety Rules
EY6535.book 3 A tool that cannot be controlled with the 22) When servicing a tool, use only iden- switch is dangerous and must be tical replacement parts. Follow repaired. instructions in the Maintenance sec- tion of this manual. 15) Disconnect battery pack from tool or... -
Page 4: For Battery Charger
EY6535.book 4 FOR BATTERY CHARGER & BATTERY PACK RECOMMENDED MINIMUM AWG SIZE OF EXTENSION CORDS FOR SAVE THESE IN- BATTERY CHARGERS AC Input Rating. Amperes AWG Size of Cord STRUCTIONS Length of Cord, Feet Equal to or But less -This... - Page 5 EY6535.book 5 19) The charger is designed to operate on standard household electrical power only. Do not attempt to use it on any other voltage! 20) Do not abuse cord. Never carry charger by cord or yank it to disconnect from outlet.
-
Page 6: Functional Description
EY6535.book 6 FUNCTIONAL DESCRIPTION Square drive (Ball detent) Clutch handle Reversing lever / Switch lock Variable speed control trigger Mode Selector switch (Drill driver with Bit holder clutch function / Impact) Battery pack (EY9230) Battery pack release button Battery charger (EY0230) -
Page 7: Selecting Mode
EY6535.book 7 ASSEMBLY Selecting Mode Select Mode Applications & work material Original Options Accessories in the market Wood/metal Wood Drill Driver Drilling Metal Hole saw 13mm(1/2") keyless EY9X003E (+)(-) head Wood screw Metal screw Torx head Driving Impact Wood screw... - Page 8 (EY9X003E) from the front). CAUTION: • Use keyless drill chuck ONLY in Then remove the bit. Drill Driver Mode of EY6535. This chuck is not designed to be used in IMPACT MODE. It can be damaged and its life will be reduced.
-
Page 9: Attaching Or Removing Battery Pack
EY6535.book 9 Using Quick change chuck 3. Removing the bit Pull the top collar of the Quick change chuck (EY9HX110) forward, then pull the bit. This Quick change chuck is designed to be used with Pana- sonic EY6535. Top collar : To insert or to remove bit. -
Page 10: Clutch Torque Setting
EY6535.book 10 For Appropriate use of Battery pack 2. After use, set the lever to its center position (switch lock). Ni-MH Battery pack EY9230 • Charge the Ni-MH battery fully before storage in order to ensure a longer service life. -
Page 11: Maintenance
EY6535.book 11 5. If the battery pack is too cold, or if the battery Note: • Before charging a cold battery pack pack has not been used for a long time, the (below 5°C (41°F)) in a warm place, charging lamp starts flashing slowly to indi- leave the battery pack at the place and cate protective charging. -
Page 12: Tightening Torque
EY6535.book 12 TIGHTENING TORQUE • The power required for tightening a bolt will vary, according to bolt material and size, as well as the material being bolted. Choose the length of tightening time accordingly. Reference values are provided below. (They may vary according to tightening conditions.) FACTORS AFFECTING TIGHTENING TORQUE The tightening torque is affected by a wide variety of factors including the followings. - Page 13 EY6535.book 13 2) Tightening time Longer tightening time results in increased tightening torque. Excessive tightening, how- ever, adds no value and reduces the life of the tool. 3) Different bolt diameters The size of the bolt diameter affects the tight- ening torque.
-
Page 14: Specifications
Note: This chart may include models that are not available in your area. Please refer to the catalogue. CAUTION: This Panasonic Multi Drill & Driver is designed to use only battery pack type EY9230, EY9136. Use with other battery pack type may damage the tool and the battery, and may result in the risk of fire and personal injury. - Page 15 EY6535.book — MEMO — — —...
- Page 16 EY6535.book 16 30-DAY QUALITY SATISFACTION GUARANTEE: If you are dissatisfied with any Panasonic Cordless Power Tool for any reason, sim- ply return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts...