Dynamic Ip (Dhcp) - D-Link DIR-868L User Manual

Section 3 - Coniguration
If you are unsure what method you use to connect to the Internet, try this irst. Cable modems usually use this type of connection
My Internet Select Dynamic IP (DHCP) to obtain IP Address information automatically
Connection: from your ISP. Select this option if your ISP does not give you any IP
numbers to use. This option is commonly used for cable modem services.
Host Name:
The Host Name is optional but may be required by some ISPs. Leave blank
if you are not sure.
Use Unicasting: Check the box if you are having problems obtaining an IP address from
your ISP.
Primary/Secondary Enter the primary and secondary DNS server IP addresses assigned by
DNS Server:
your ISP. These addresses are usually obtained automatically from your
ISP. Leave at 0.0.0.0 if you did not speciically receive these from your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your speciic ISP. 1500 is the default
MTU.
MAC Address: The default MAC address is set to the Internet port's physical interface MAC address on the broadband router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to
replace the Internet port's MAC address with the MAC address of your Ethernet card.
D-Link DIR-868L User Manual

Dynamic IP (DHCP)

27