Application Rules - D-Link DIR-868L User Manual

Section 3 - Coniguration
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications
have diiculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-868L.
If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger Port"
ield, select the protocol type as TCP or UDP, then enter the irewall (public) ports associated with the trigger port to open them for inbound traic.
Name:
Enter a name for the rule. You may select a pre-deined
application from the drop-down menu and click.
Trigger:
This is the port used to trigger the application. It
can be either a single port or a range of ports.
Traic Type:
Select the protocol of the trigger port (TCP, UDP, or Both).
Firewall:
This is the port number on the Internet side that
will be used to access the application. You may
deine a single port or a range of ports. You can use
a comma to add multiple ports or port ranges.
Traic Type:
Select the protocol of the irewall port (TCP, UDP, or Both).
Schedule:
The schedule of time when the Application Rule will be
enabled. The schedule may be set to Always, which will
allow the particular service to always be enabled. You can
create your own times in the Tools > Schedules section.
Click Save Settings to save the current coniguration.
D-Link DIR-868L User Manual

Application Rules

78