D-Link DIR-868L User Manual page 84

Section 3 - Coniguration
Classiication A QoS Engine Rule identifies a specific message flow and
Rules: assigns a priority to that low. For most applications, automatic
classiication will be adequate, and speciic QoS Engine Rules
will not be required.
The QoS Engine supports overlaps between rules, where more
than one rule can match for a speciic message low. If more than
one rule is found to match, the rule with the highest priority will
be used.
Name:
Create a name for the rule that is meaningful to you.
Queue ID:
Select a desired priority level for the rule from the drop-
down menu. This priority level will be used to determine the
importance of this rule according to the priority rule selected
in the QoS Setup above.
Protocol: The protocol used by the application.
Local IP Range:
The rule applies to a low of messages whose LAN-side IP address
falls within the range set here.
Application Port:
Select the application port for this rule from the drop-down
menu.
Remote IP Range: The rule applies to a low of messages whose WAN-side IP address
falls within the range set here.
Click Save Settings to save the current coniguration.
D-Link DIR-868L User Manual 80