JVC KW-NX7000 Instructions Manual page 122

On the map screen, ~~ ....... keys of the remote
controller always works for scrolling the map.
Check the connection information of the leads below
through <System> in <Vehicle Info>. (~ pages 49,
54)
- GPS antenna
- Reverse gear signal lead
If any disconnection is found, connect the lead again.
• If no problems are found with connections, reset the
calibration data by selecting <Reset Calibration
Data>. (~page
52)
Route caltulation may take long depending on the route.
Wait for awhile.
Check your PIN code and input correct one.
This is not a malfunction. The system may also search
areas around the selected city/state.
Failed to calculate the route. Select another destination/
via point.
<Guidance Volume> level is set to the minimum level.
Adjust it to the optimum level. (~ page
50)
No valid traffic information is available now.
Remedies/Causes
Reversing signal/speed signal lead are not connected.
Connect them correctly (~ Installation/Connection
Manual-separate volume).
The System proceeds calibration. Wait until calibration is
completed. When calibration is completed, the guidance
starts.
Valid information is not available in the database. Search
for another place.
Surround noise interferes. Increase the <Adaptive
Volume> level. (~ page
50)
Change the <Output> setting.
(~page
50)
On the map screen, you can operate some limited
functions of the current source only. Press AV/OFF on the
remote controller or DISP and operate the source on the
AV screen.
• You cannot operate AV sources with the
remote controller on the maJlscreen.
•.NaVigation voice canhotbe hea·rdffomttie
speakers.
• _ Route caltulatilYllSeenlsto have stopped,
~-. ffActivationJalled. Please tryagain.~ appears
when
ti'yingtosubsaibe to'traffkservice;
• You cannot operatesomefuneti()n50fan AV
source on the map screen.
.,The
(urreRt p9Scition
<lispl~yed'onthemap_­
remains wrongformore tl1a030 minutes.
••• IIThereisnoavailabletra:fflcihfOfrYlation
-now.:"
appears on the monitor;
• "Specified destination
is notfound.~
a'ppears
onthe monitor,
• A POI fOl,lndusing <POI Nal1'le> in the' -
< Destination>Menp5
is
nO{within the
selected
dty/sta~e
.
•,-Navigation guidance is sometimesincorreet.
•• The voice gUidancedoes noteolmfout from
the speaker on the driver's side.
122
On the map screen, ~~ ....... keys of the remote
controller always works for scrolling the map.
Check the connection information of the leads below
through <System> in <Vehicle Info>. (~ pages 49,
54)
- GPS antenna
- Reverse gear signal lead
If any disconnection is found, connect the lead again.
• If no problems are found with connections, reset the
calibration data by selecting <Reset Calibration
Data>. (~page
52)
Route caltulation may take long depending on the route.
Wait for awhile.
Check your PIN code and input correct one.
This is not a malfunction. The system may also search
areas around the selected city/state.
Failed to calculate the route. Select another destination/
via point.
<Guidance Volume> level is set to the minimum level.
Adjust it to the optimum level. (~ page
50)
No valid traffic information is available now.
Remedies/Causes
Reversing signal/speed signal lead are not connected.
Connect them correctly (~ Installation/Connection
Manual-separate volume).
The System proceeds calibration. Wait until calibration is
completed. When calibration is completed, the guidance
starts.
Valid information is not available in the database. Search
for another place.
Surround noise interferes. Increase the <Adaptive
Volume> level. (~ page
50)
Change the <Output> setting.
(~page
50)
On the map screen, you can operate some limited
functions of the current source only. Press AV/OFF on the
remote controller or DISP and operate the source on the
AV screen.
• You cannot operate AV sources with the
remote controller on the maJlscreen.
•.NaVigation voice canhotbe hea·rdffomttie
speakers.
• _ Route caltulatilYllSeenlsto have stopped,
~-. ffActivationJalled. Please tryagain.~ appears
when
ti'yingtosubsaibe to'traffkservice;
• You cannot operatesomefuneti()n50fan AV
source on the map screen.
.,The
(urreRt p9Scition
<lispl~yed'onthemap_­
remains wrongformore tl1a030 minutes.
••• IIThereisnoavailabletra:fflcihfOfrYlation
-now.:"
appears on the monitor;
• "Specified destination
is notfound.~
a'ppears
onthe monitor,
• A POI fOl,lndusing <POI Nal1'le> in the' -
< Destination>Menp5
is
nO{within the
selected
dty/sta~e
.
•,-Navigation guidance is sometimesincorreet.
•• The voice gUidancedoes noteolmfout from
the speaker on the driver's side.
122