Installing Your Hub; Verify Included Parts; Install The Transceiver Module - HP ProCurve 10Base-T 12 Installation Manual

Installing the Hub

Installing Your Hub

Installing Your Hub
To install and configure your hub, you must complete six basic tasks. They are:

1. Verify included parts

Each HP ProCurve 10Base-T Hub has the following components shipped with it:

2. Install the transceiver module

You may want to install the transceiver module and any external transceiver
you may want to attach to it before installing the hub. Transceiver modules
may require more lengthy protrusions created by the greater widths of the
different cables and connectors you may attach to a module (for example, an
1-2
locating and verifying the necessary parts
installing a transceiver module
connecting the hub to a power source
mounting the hub
connecting the hub to your network
This manual. The HP J3301A and HP J3303A both come with the HP
ProCurve 10Base-T Hubs Management and Configuration guide
(5967-6862).
A power cord, one of the following:
Australia/New Zealand
Denmark
Europe
Israel
South Africa
Switzerland
United Kingdom
U.S./Canada/Mexico
accessory kit (5183-7210):
• bumper feet (4)
• bracket-to-rack screws 12-24 (7/16") (4)
• bracket-to-hub screws M4 (5/16") (4)
• mounting brackets for 44.55mm (1.75")-height hub (5183-1381)
(8120-6803)
(8120-6806)
(8120-6802)
(8120-6799)
(8120-6807)
(8120-6807)
(8120-6801)
(8120-6805)