HP ProCurve 10Base-T 12 Installation Manual page 18

Installing the Hub
Installing Your Hub
1.
Figure 1-2. Hub-to-Bracket Assembly
2.
3.
1-6
Using a Phillips Crosshead No. 2 screwdriver, attach the mounting
brackets to the hub with No. M4 (5/16") silver screws (included in the
accessory kit).
Position the hub in the rack or cabinet and slide it up or down until the
rack holes line up with the bracket holes.
Then attach the bracket to the rack with the No. 12-24 (7/16") screws and
black nylon washers included in the accessory kit with a Phillips Cross-
head No. 2 screwdriver. A flatblade screwdriver will also work in assem-
bling the hub to the rack. Make sure you have screws that fit your cabinet
or rack before mounting the hub.