If You Cannot Reach A Destination; Call Waiting (Camp-On); Busy Override - Joining A Call In Progress - Siemens HiPath 500 User Manual

Step by Step
)62

If you cannot reach a destination

Call waiting (camp-on)

Prerequisite: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Z
Wait (approx. 5 seconds) until the busy tone is followed
by the ring tone.
The called party can then respond
The called party can prevent automatic call wait-
ing
If this feature is configured (contact your service
personnel), you will immediately hear the ring
tone.
Busy override – joining a call in progress
This function is only available if it has been configured
by the service technician (contact your service person-
nel).
Prerequisite: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
S
Press the "Consult" key. The LED flashes.
Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (Num-
ber or name)".
You can now start talking.
Enhanced phone functions
page 35.
page 34.
41