If You Cannot Reach A Destination; Call Waiting (Camp-On); Busy Override - Joining A Call In Progress - Siemens HiPath 2000 User Manual

Step by Step
T0326Camp-on
M0052Override

If you cannot reach a destination

Call waiting (camp-on)

Prerequisite: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Wait (approx. 5 seconds) until "T0326Camp-on" appears
on the display and the busy tone is followed by the ring
tone.
The called party can then respond
The called party can prevent automatic call wait-
ing page 63.
If this feature is configured (contact your service
personnel), you will hear the ring tone and the
message "T0326Camp-on" is immediately dis-
played.
Busy override – joining a call in progress
This function is only available if it has been configured
by the service technician (contact your service person-
nel).
Prerequisite: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Select and confirm the option shown.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "T0294Override:
(Number or name)".
You can now start talking.
Enhanced phone functions
page 62.
71