Making Calls On Multiple Lines Alternately; Mulap Conference Release - Siemens HiPath 2000 User Manual

Making calls in the team/executive/secretary configuration
Step by Step
112

Making calls on multiple lines alternately

Prerequisite: You are conducting a call via one of your
group's trunks. Another trunk key is flashing.
T
Press the flashing trunk key. The first call party is on
hold on the other trunk.
T
Press the trunk key flashing slowly. The second call par-
ty is on hold.
You can switch between lines as often as you wish.
Press the trunk key flashing slowly each time.

MULAP conference release

If configured (consult your service personnel), you can
program a sensor key on your phone with the function
"M1845MULAP Privacy Release"
fault label is "K1847Priv Release".
If you program this key, you do not have to use the
menu to set up a conference. Your team partner only
has to press the flashing trunk key associated with your
trunk on his or her phone to immediately join the con-
ference.
[
You are conducting a call.
S
Press the "K1847Priv Release" key. The LED lights up.
Up to three team members can now join the confer-
ence.
Prerequisite: The trunk on which you are speaking is
configured on the other phone as a trunk key.
T
Press the flashing trunk key.
page 73. The de-