Call Forwarding; Using Variable Call Forwarding - Siemens HiPath 2000 User Manual

Step by Step
M0019Forwarding on
M00581=all calls
M00592=external calls only
M00603=internal calls only
M0047Save
M0020Forwarding off

Call forwarding

Using variable call forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.
The call forwarding key flashes if you are a call
forwarding destination
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work)
r
Press the key shown.
or
c
Open the idle menu
Select and confirm the option shown.
Confirm
or
select and confirm the option shown
or
select and confirm the option shown.
j
Enter the destination number.
Confirm.
Deactivating call forwarding
r
Press the key shown.
or
Select and confirm the option shown.
page 20.
page 123!
page 26.
Basic functions
43