Messaging; Sending A Predefined Message - NEC M155 User Manual

Messaging

Sending a predefined message

With your M155 predefined messages to a predefined destination
number can be sent.
Attention: Contact your System Administrator to configure the
predefined messages and the related telephone
numbers in the M155.
To send a message, perform the following steps:
[
1. Simultaneously press both keys for a short
time.
2. Repeatedly press the Upper key for a short
time until the display shows:
3. Press the Lower key for a short time.
4. Repeatedly press the Upper key for a short
time until the display shows:
5. Press the Lower key for a short time.
6. Repeatedly press the Upper key for a short
time until the display shows: the message
you want to send.
7. Press the Lower key for a short time.
The message is displayed. If so required use
]
(repeatedly) pressing the Upper key for a
short time to scroll through the message.
8. Press the Lower key for a short time.
Messaging
Messages
Drafts
33