NEC M155 User Manual page 46

Translation Tables
Instruction table texts (translation required)
The following tables are used for translations – they are not part
of the published user manual.
Bookmark Name
CallSetUp
CodeFormed
ContinueStep
DisplayMessage
DisplaySending
EnterAcAtPrompt
EnterPinAtPrompt
M155Deregistered
M155Registered
MelodiesPlayed
MsgAckSuccessfullySent
MsgConfirmation
MsgSuccessfullySent
NoteDigit
Or
ParkNeeded
ParkNotNeeded
PressBothKeysShort
46
Text
The call is set up to the destination.
Repeat previous two steps until the
complete code is formed.
Continue with step
The message is displayed. If so
required use (repeatedly) pressing the
Upper key for a short time to scroll
through the message.
While sending the message the display
shows Sending.
Enter the authentication code at the AC
prompt.
Enter the PIN code at the PIN prompt.
When the display shows
Registered the M155 is deregistered
and can no longer be used at the
DECT system.
When the display shows the time/date
the M155 is registered and can be
used.
The melodies will be played when
going through the various melodies.
When the message is successfully sent
and acknowledged
displayed.
Urgent and Emergency messages are
given a receipt confirmation.
When the message is successfully sent
Msg. sent is displayed.
Note that the selected digit is added to
the code.
OR
PARK code is needed:
PARK code is not needed:
Simultaneously press both keys for a
short time.
Not
Msg. sent is