Table of Contents
Advertisement
1.7.2 Roll paper
EPSON offers the roll paper holder as an option for the FX-80.
The FX-80 accommodates a roll of single ply paper measuring 8.5" in width with a
I-inch core.
-
-
1.
Remove the printer lid and the printer cover.
2. Raise the two sprocket levers to loosen and adjust the sprocket pin position at
both ends of the sprocket shaft. Then lock the sprocket lever.
3. Pull the scale toward the front of the printer to detach the scale from the platen.
4. Unlock the release lever by pulling it forward.
5. Push the paper into the insertion slot between the paper guides at the rear part
of the printer mechanism.
6. Lock the release lever.
NOTE:
Two-ply roll paper is not recommended for use.
-
-
-
Loading of Roll Paper (1)
7. While turning the paper feed knob clockwise, confirm that the paper advances
straight up.
If
not, adjust the inserted paper position by unlocking the release
lever.
8. Push the scale back into position.
-
-
-
-
-
-
1-12
Advertisement
Table of Contents
