Epson FX-BO Operation Manual page 98

*
ESC
ESC
*
U6II,t;i
ESC
* -
8-pin bit image mode
Wug.,.,'''''
CHR$(27);"*";CHR$(m);CHR$(n,);CHR$(n2)
h'''iijil''''
This code selects 8-pin bit image mode.
Head Speed
m Mode Dots/8"
(inch/sec)
0
Normal density
480 16
1
Dual density
960 8
2
Double-speed, Dual-density
960 16
3 Quadruple-density
1920 8
4
CRT Graphics
640
8
5 Plotter Graphics 576 12
6
CRT Graphics II
720 8
For the procedure to obtain nl and nz, refer to ESC K. If the value
specified for m is not in the range 0 to 6, the specified number of data
will be ignored.
When m is 2 or 3, the horizontally adjacent dots cannot be printed.
10 LPRINT CHR$(27);
II
*"
;CHR$(0);CHR$(0);CHR$(1);
20 FOR 1=1 TO 256: LPRINT "x";: NEXT
30 LPRINT "END"
This is the same as the following.
10 LPRINT CHR$(27);"K";CHR$(0);CHR$(1);
20 FOR 1=1 TO 256: LPRINT "x";:NEXT
30 LPRINT "END"
~'i4.1m
ESC K, ESC L, ESC Y and ESC Z
NOTE:
ESC K is the same as mode O.
ESC L is the same as mode 1.
ESC Y is the same as mode 2.
ESC Z is the same as mode 3.
3-49