Hitachi FS 10SA Instruction Manual And Safety Instructions page 6

19. REMOVE ADJUSTING KEYS AND WRENCHES.
Keys and adjusting wrenches remove from tool before turning it on.
20. OUTDOOR USE EXTENSION CORD.
When tool is used outdoors, use only extension cord intended for use outdoors
and so marked.
21. STAY ALERT.
Watch what you are doing. Use common sense. Do not operate tool when you
are tired.
Tools should never be used by you if you are under the influence of alcohol,
drugs or medication that makes you drowsy.
22. CHECK DAMAGED PARTS.
Before further use of the tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that may affect
its operation.
A guard or other part that is damaged should be properly repaired or replaced
by an authorized service center unless otherwise indicated elsewhere in this
Instruction Manual.
Have defective switches replaced by the authorized service center.
Do not use tool if switch does not turn it on and off.
23. NEVER USE A POWER TOOL FOR APPLICATIONS OTHER THAN THOSE
SPECIFIED.
Never use a power tool for applications other than those specified in the
Instruction Manual.
24. HANDLE TOOL CORRECTLY.
Operate the tool according to the instructions provided herein. Do not drop
or throw the tool. Never allow the tool to be operated by children, individuals
unfamiliar with its operation or unauthorized personnel.
25. CHECK FOR LIVE WIRES.
Avoid the risk of severe electrical shock by checking for live electrical wires
that may be buried in walls, floors or ceilings. The wires should be de-energized
before work begins.
26. KEEP ALL SCREWS, BOLTS AND COVERS TIGHTLY IN PLACE.
Keep all screws, bolts, and plates tightly mounted. Check their condition
periodically.
27. DO NOT USE POWER TOOLS IF THE PLASTIC HOUSING OR HANDLE ARE
CRACKED.
Cracks in the tool's housing or handle can lead to electric shock. Such tools
should not be used until repaired.
6