Siemens FI18NP Series Operating Instructions Manual page 14

Dispensing water
Place a suitable receptacle under
the discharge opening.
Press the request water button.
Dispensing ends, when the button
is released.
Tip:
The water from the water dispenser is
cooled to a palatable temperature. If you
would like the water colder, place ice
cubes in the glass before dispensing the
water.
Dispensing ice
m
Caution!
(S RSX YWI XLI MGI HMWTIRWIV JSV PSRKIV
XLER  QMRYXIW [MXLMR E XMQI TIVMSH SJ
 QMRYXIW ;EMX JSV E JI[ QMRYXIW
QSVI FIJSVI SVHIVMRK QSVI
6MWO SJ HEQEKI XS XLI ETTPMERGI
Place a suitable receptacle under
the discharge opening.
Press the request ice cubes button.
Dispensing ends, when the button
is released.
or
14
Press crushed ice request button.
Dispensing ends, when the button
is released.
Note:
Release the ice dispensing button,
when the receptacle is filled approx half-
way. Ice in the discharge may cause the
receptacle to overflow or block the
discharge.
Detachable rest
Detach the rest in order to place larger
receptacles below the discharge
opening.
Remove and clean the
water capture bowl
Overflow water collects in the water
capture bowl and has to be regularly
removed.
Detach the rest.
Remove the sieve and pull out the
water capture bowl.
Empty the water capture bowl and
replace it.
Insert the sieve tip the rest back up
again.
Removing and cleaning
the ice cube container
If ice cubes have not been dispensed
for a prolonged period, they will shrink,
have a stale taste and stick together.