S-Video - HP ExpressCard Analog Hardware Setup Manual

S-Video

To connect S-Video:
1. To avoid video transmission problems, unplug the RF coaxial
cable before connecting an S-Video cable.
2. Connect the S-Video cable 1 to the S-Video-out jack on your
cable or satellite set-top box.
✎
3. Connect the red and white plugs on the composite
audio/video cable 2 to the red and white audio jacks on your
cable or satellite set-top box.
Ä
Hardware Setup
Refer to your cable or satellite set-top box user guide for the
exact location and labeling of jacks.
Do not connect the yellow composite video plug.
Advanced connections
4–5