Adding An Audio Receiver To Your Connection - HP ExpressCard Analog Hardware Setup Manual

Advanced connections
Adding an audio receiver to your
connection
Adding a stereo or surround sound audio receiver to your
connection allows you to play music on your computer and listen
to it on the audio receiver.
To add an audio receiver to your connection:
✎
Audio receiver and computer features may vary. Refer to your
audio receiver and computer user guide for the exact location
and labeling of jacks.
1. Connect the red and white (right and left) plugs of an audio
cable (not included) to the red and white (right and left)
audio-in jacks on your audio receiver 1.
2. Connect the other end of the audio cable to the headphone
(audio-out) jack on the computer 2.
4–10 Hardware Setup