NEC Versa 2600 Series Service Manual page 56

SOLD BY laptopia2005 DO NOT RESELL!!
As a new user, it is important to check and perhaps change the following parameter set-
tings.
Startup Menu
Table 2-6 Setup Parameters
Parameter
Miscellaneous
Low battery beep
Wake Up Alarm
Hour
Minute
L2 Cache
Exit
Save and Exit
Save and Reboot
Exit (No Save)
Default Settings
Version Info
T
Date and Time
Set the System Date and Time to the current date and time. Use numerical input
(remember that the hour setting begins at 0 and ends at 23). The settings remain in
memory even after you turn off system power.
T
Boot Device
Select the drive you want your system to read from when the computer starts up.
Specify the boot sequence, by instructing the system to look
 only to the Hard Disk, drive C
 first to the Diskette, drive A, and then to drive C.
SOLD BY laptopia2005 DO NOT RESELL!!
Setup and Operation
Alternate
Default
Settings
Setting
Enabled Disabled (unchecked)
(checked) One Time, Every Day
Disabled User input
User input
Enabled Disabled (unchecked)
(checked)
To save the
current setup
parameters (with
changes) and exit
setup.
To save the current
setup parameters, then
reboot the computer.
To exit Setup without
saving any parameter
setting changes.
To restore the default
Setup settings, then
Exit.
Displays
information about
Setup and BIOS.
2-21