Removing The Lcd Assembly (Step 2) - NEC Versa 2600 Series Service Manual

SOLD BY laptopia2005 DO NOT RESELL!!
4-12 Field Service Guidelines
Remove a screw from each of the outside hinge cover slots and one from the
3.
lower left of the keyboard frame.
4. Remove two screw covers on the back of the laptop, under each screw cover re-
move two screws.
5. Use your hands to carefully partially separate (do not try to totally separate at this
time) the LCD and top cover from the bottom base assembly.
Figure 4-9 Removing the LCD Assembly (Step 2)
6. Disconnect the Speaker Assembly cable from connector (CN403)
Disconnect the two LCD cables
7.
8. It is now OK to totally separate the LCD and cover from the chassis assembly.
NOTE
If you choose to close the LCD screen at
this point, use caution to not damage the
subassembly.
SOLD BY laptopia2005 DO NOT RESELL!!