64
Loading Disk
Follow the procedure below to load a disk in the Built-in DVD-RAM drive. See Appendix B
for the description on the disk and the notes on handling the disk.
Handle the disk carefully. Handling the disk roughly may cause it to be broken and
•
then a part or all of the data saved in the disk to be lost.
If the disk cannot be loaded to the Built-in DVD-RAM drive suitably, do not add an
•
excess force to load it. Instead, remove it from the Built-in DVD-RAM drive and check
the direction and orientation in which the disk is placed.
Do not place any disk unavailable for the Built-in DVD-RAM drive. Failure to follow it
•
may cause the Built-in DVD-RAM drive to be defected.
Some computers can be equipped with the Built-in DVD-RAM drive vertically. In the
•
installation, the Built-in DVD-RAM drive cannot accept 8-cm CD.
1.
Make sure that the power of the computer is on.
2.
Press the eject button.
The tray is ejected.